TheSimplest Way To Weld Aluminum Parts – No Expensive Equipment Required. All You Need Is A Propane Torch, And Some Simple Easy Melt Welding Rods!
These welding rods make asound joint, Stronger than the parent metal and can Join Thin and Thick Parts Together. No fluxes and no fumes are required (however, you can use some flux if you feel it will do a better job). Its corrosion resistance is excellent and has minimal or no distortion to the parent material.
Thoroughly clean the area you’re about to weld by brushing the base with stainless steel brush until it becomes shiny. Then evenly heat the area to be welded.
As you heat, rub the rod vigorously against the heated area until the rod starts flowing.
Please Note: Never apply heat directly to the rod as it will crumb, and if you manage to melt the rod directly, the weld will be easily breakable. Remember, melting the rod directly is a wrong way, and makes crumby welds.
The Easy Welding Rods areHigh-Quality Special Aluminum-Alloy Rodsused to weld/braze primarily Aluminum and Aluminum alloys but can be used to braze any other non-ferrous materials except for stainless steel.
Recommended for welding or brazing aluminum alloy: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005, and cast alloys 710.0 and 711.0